Dr it services 2021/2022: Computer Repair Service of the Year
/ By Vlad Tabaranu / Computer Repair and Maintenance / / 0 Comments

How Do I Fix a Computer That Turns on but Shows No Display

If our computer powers on but shows no display, we should start by checking all connections, including power cords and data cables. We need to verify the graphics card is properly seated, and that the monitor is set to the correct input source. Then, we can check BIOS settings to confirm hardware compatibility. If these steps don't resolve the issue, we can investigate potential hardware faults or driver conflicts to restore functionality and get everything running smoothly.

Key Takeaways

  • Verify all power and data cable connections to the PC and monitor to ensure they are secure and undamaged.
  • Check the graphics card connection; ensure the display cable is connected to the graphics card, not the motherboard.
  • Reseat RAM and check for proper seating of the CPU and graphics card to eliminate potential hardware issues.
  • Access the BIOS settings and disable Fast Boot to troubleshoot display configurations and ensure hardware compatibility.
  • Update or roll back display drivers using Device Manager; consider booting in Safe Mode for troubleshooting.

Checking Connections

When we encounter a computer with no display, the initial step is to check all connections. We should verify that the power cord is securely connected to both the PC and the outlet, and that the power switch on the PSU is on. Next, we'll check data cables like HDMI or VGA are firmly attached at both ends, inspecting them for any damage. It's essential to check peripheral connections, verifying devices like keyboards and mice are properly connected. If issues persist, testing with alternative setups can help isolate the problem, confirming whether the issue lies with the PC or the monitor itself. Additionally, ensure that the monitor is powered independently to check for boot animation or diagnostic info that may indicate its functionality. If you are unsure about the connections or need professional assistance, consider reaching out to local computer repair specialists for guidance.

Monitoring and Display Issues

Monitoring and display issues can be frustrating, especially when we rely on our computers for daily tasks.

To begin, let's verify our graphics card is properly connected; the display cable should plug directly into it, not the motherboard. Loose RAM can also cause issues, so reseating it or testing with one stick might help. Additionally, ensure that the correct display cable type is being used for your connection. Regular preventative maintenance can help avoid such issues in the future.

We must also check power connections to the CPU and motherboard. A faulty PSU can prevent startup, while outdated graphics drivers or malware might affect functionality.

If the monitor works with another device, the problem likely lies within our PC.

Let's systematically troubleshoot to pinpoint the issue.

Dr IT Services Birmingham Prestige Awards 2019
Dr IT Services Prestige Awards 2021-2022
Dr IT Services Prestige Awards 2024-2025

📞 07405 149750 | 🏆 Dr IT Services - Affordable Award-Winning Services since 2000

How Do I Fix a Computer That Turns on but Shows No Display

💻Computer Repair - 📱Laptop Repair - 💽Data Recovery - 🍎Mac Repair

Recommended laptops

Serving: Birmingham City Centre,Northfield,Halesowen,Rowley Regis,Oldbury,West Bromwich,Edgbaston,Smethwick,Handsworth,Winson Green,Birchfield,Quinton,Sparkbrook,Bordesley,Kings Heath,Jewellery Quarter,Balsall Heath,Harborne,Rubery,Digbeth,Moseley,Lozells,Highgate,Hockley Port,Woodgate,Selly Oak,Bournville,Bearwood,West Heath,Hawkesley,Langley Village,Warley,Rednal,Longbridge,Blackheath,Lapal,Quarry Bank,Bournbrook,Tividale,Rounds Green,Selly Park,Kates Hill,Dixons Green,Oakham,Cradley Heath,Cotteridge,Stirchley,Weoley Castle,Bartley Green,Frankley,Shenley Fields,California,Hayley Green,Hasbury,Hawne,Dudley Wood,Cradley,Ladywood,Walkers Heath,Brandwood End,Lifford,Vauxhall,Park Central,Rowley Village,Whiteheath,Rood End,Causeway Green,Brandhall,Turves Green,Netherton,Bristnall Hall Fields,Warley Salop,Bleakhouse,Merrivale,Little Fields,Warley Wigorn,Blakeley Hall,Langley Green,Kings Norton,Metchley

Send us a message!

BIOS and UEFI Settings

  1. Confirm we're pressing the correct BIOS key (like DEL or F2) at the right time.
  2. Disable Fast Boot to allow access to UEFI settings.
  3. Check the display configuration in BIOS; it should match our hardware. Additionally, ensure that the hardware upgrades are compatible with the system to prevent conflicts.
  4. Update the BIOS firmware if display issues persist, guaranteeing compatibility with the motherboard. Additionally, ensure that the GTX 1650 Super graphics card is properly seated and connected, as it may affect BIOS accessibility.

Hardware Issues

Addressing hardware issues is crucial for resolving a computer with no display, as even minor component misconfigurations can lead to significant problems.

Initially, we should verify the monitor's input source and make sure the display cable is securely connected. Testing the monitor with another computer can help rule out issues.

Next, let's check the RAM and CPU for proper seating. We can also inspect the graphics card and motherboard connections, confirming they're secure.

Finally, we need to ascertain the power supply is functioning correctly and test with different cables if necessary. Each step brings us closer to a solution. Additionally, consider virus and malware removal as these can sometimes interfere with hardware functionality and cause display issues.

Driver Issues

While we often focus on hardware when troubleshooting a computer with no display, driver issues can be just as critical.

Here's how we can tackle them:

  1. Update Display Drivers: Open Control Panel, proceed to Device Manager, right-click on the graphics card, and select Update Driver Software.
  2. Roll Back Display Drivers: In Device Manager, right-click the device, go to Properties, then the Driver tab, and click Roll Back Driver.
  3. Check for Windows Updates: Head to Windows Update in Control Panel and install any available updates.
  4. Advanced Troubleshooting: Boot into Safe Mode, update or roll back drivers, and consider a clean install from the manufacturer's site. Additionally, ensuring that you have advanced storage solutions can help in addressing performance issues related to driver conflicts.