How to Recover Data From Failing Hard Drives With a Data Recovery Program 1
/ By Vlad Tabaranu / Data Recovery / 0 Comments

How to Recover Data From Failing Hard Drives With a Data Recovery Program

If your hard drive fails, starting your computer could be problematic. Nonetheless, if you have data recovery software on hand, getting back your critical files will not be a problem.

Broken hard drives are usually the result of some sort of physical failure. These can be caused by accidents, such as dropping the drive, or by manufacturing faults, such as a bad sector or head crash. You might be surprised to learn that some of these problems can be remedied, even if the drive itself is still working.

If you aren’t experienced, a hard drive may appear to be functioning correctly but there are several warning signs that can point you in the wrong direction. Some of these include the oddest noises, such as clicks or grinding sounds, and the continuous display of error messages. In other words, a broken hard drive might be a sign of more serious problems that will require more than a quick fix.

Hard drives are made up of many components, including the magnetic head, platters, and controller electronics. Each component is designed to last for a certain amount of time before it becomes faulty. A good rule of thumb is to expect your hard drive to function for at least six to ten years. It’s also worth noting that it’s possible for a hard drive to be damaged beyond repair, resulting in an unrecoverable file.

Fortunately, there are a few ways to fix a hard drive without formatting it, or risking losing important data. You can use a disk manager tool like Disk Utility to perform a diagnostic check, or you can try an antivirus program to get rid of viruses.

Depending on the type of hard drive, you might need to replace the spindle motor, actuator arm, or platter. If it’s a SATA drive, you can usually restart your computer to re-establish its connection. FC or SAS drives are slightly more expensive but can provide more storage capacity.

If you’ve already tried the above remedies, but your hard drive is still not performing, you’ll need to find a broken hard drive data recovery solution. There are several options, from professional services to freeware. However, you should not trust just any data recovery program, especially if the drive is physically damaged.

One of the easiest ways to diagnose a hard drive is to run a “deep scan” on the device. This will allow you to see what you have been missing, and hopefully recover some of your important files. The process is fairly straightforward and should take no more than a few minutes.

Other tools, such as a hard drive scanner, can be helpful, but aren’t always the best. For example, a USB PCB might be running at a temperature too high to read your data.

The best way to go about this is to use a hard drive data recovery solution, such as MiniTool Power Data Recovery. With this software, you can recover a wide range of data, including files deleted, corrupted, or lost in the most believable manner.