A computer with a hard drive that has failed and is now asking for your help in restoring it, can be a big headache. The good news is that most people have learned how to repair a dead computer by now. Unfortunately, not all of them know how to restore a dead computer back to life. If you are one of those who have no idea what this is, then here are some things that you need to know.
How to repair a dead computer starts with making sure that the power to your machine is switched off. You can do this by unplugging the power from the computer’s main circuit board. Now, if you are on the keyboard, you need to press the Alt or the Control keys until you are able to see the little light strip that is visible on the screen. This light shows that the power is fully switched off. Now, if you want to know how to repair a dead computer, you should make sure that the restore point for your hard drive is also switched off.
After that, you have to back up your system data. Typically, this means you will have to create a bootable flash drive to store all your important files. Once you have made the flash drive bootable, you can then plug the flash drive into your computer and follow the instructions on how to restore your system using the software CD that came with your machine. Note that, if you want to know how to repair a dead computer by restoring it back to its original state, then you may skip the step of making a bootable CD. If you want to learn how to restore a dead computer back to its original state, you can always look for the Restore Point tool.
When you are looking at the Restore Point, you need to make sure that you are using the one with the same name as the original hard drive. If you have any additional drives or disks, you should make sure that they are also marked with the same drive letter. For example, if you have a Seagate 500GB hard drive, you should make sure that you plug in your other drives such as the WD My Book Pro 500GB hard drive. Once you have completed backing up your system, you should then uninstall the original software from your machine before starting the process of how to repair a dead computer.
After that, you need to restart your machine. This will bring up a confirmation that your hard drive is actually working again. If it does not boot back up properly, you can always boot your machine in safe mode which will load Windows programs without any drivers or settings being loaded onto the computer. In case you cannot boot into safe mode, you can always restore your computer back to a previous functional state through the DVD/CD-ROM drive.
You might need to run various disk defragmenter programs on your system if there is a lot of fragmentation. Fragmentation occurs when there is a lot of old data and old programs stored on the drive. To fix this, you need to use the Disk Defragmenter program. To get the most effective results out of this software, you should select the Defragment tab in the setup and click the right option. Thereafter, you should go ahead and select the Size and bandwidth.
CLOSED BETWEEN 13 - 19 OF SEPTEMBER !!!
1). Diagnostics £20. If you go ahead with the repairs, it's FREE!
2). Minimum 20% OFF for Emergency Services & Armed Forces
3). Not a SHOP, it's a private house. For exact location, click -> MAP Directions
4). With 2 or more services you'll automatically get a discount (usually at least 20%)
5). Devices are checked on a "first come, first served" basis. PRIORITY SERVICE: £50 payable in advance!